义乌东阳不发火耐磨工厂地上地坪划线 Ordinary type sealer, conductive copper and platinum or copper network,antistatic putty or painting on the antistatic finish ground processing coated closed primer – Pu conductive copper and platinum ground scraping conductive putty or conductive coating of paint – smooth – coated antistatic topcoat sanding (painting, brush or roller) total film thickness 0.2 0.5 妹妹, antistatic surface layer thickness of about 0.1-0.2 妹妹 (coated), low cost, painting a solvent release, surface smooth degree and surface wear-resisting layer use life was less than the self leveling. Embossed floor is a kind of new economy green concrete surface treatment materials. Embossing products the most prominent feature is the ability to directly on the concrete surface very realistic expressed in a variety of different ground material texture, texture and luster. The hardness is the same as that of the concrete, which is mainly determined by the number and thickness of the concrete. Not only improve concrete surface compressive, bending, wear resistance and other physical properties, also can appear similar to the effect of natural granite, marble, cut axinite, volcanic rock, quartzite, wood board and brick. Standard beauty stone embossed series color up to more than 30 kinds, different combinations can deploy any color, can make your imagination gallop arbitrary, for designers to provide infinite creative space to meet the need of different age, different construction. Contact: 4oo-o7o9-91o in waterborne epoxy self leveling coating co妹妹only used additives have loose agent, anti foam agent, leveling agent, rheological agent, as there are anti static, non slip, extinction and other functional additives. In floor coating assessment often see major drawbacks shrinkage holes and pinholes, orange peel, optical loss, shrinkage and laugh, because owe good loose and cause the flooding and floating color, uneven color, because not leveling incurred uneven appearance. These problems often require robust additives to eliminateAssistant is an indispensable component in the production, storage and construction of waterborne epoxy resin coatings, but a small number of enterprises have the “help” and neglect its. The use of a variety of additives on the role of paint and the ultimate film, a targeted selection of a variety of additives.Water based epoxy self leveling paint should be used in the selection of additives, dispersing agent, dispersing agent, rheological agent, leveling agent, etc.. We should consider the compatibility with waterborne epoxy system with choice, avoid gel and oil film defects. Dispersing agent is of pigments and fillers of secondary particles surface wetting, and the mechanical shear from secondary abrasive particles dispersed to lower particle surface adsorption, coating, the negative charge of the repulsive interactions not disorderly suspended in the paint, keep stable states of pigments and fillers. The other function of dispersing agent is coloring, all kinds of pigment, filler particle size, density are not the same. With weak cohesion between different pigment of the pigment, the average color development without causing floating color of flooding. With the binary system has good compatibility, can effectively control the floating color and can well make pigments and fillers not disorderly dispersed in the system, so as to improve the storage stability of general elected polymer type, the moderate hydrophilic lipophilic balance value.Embossed floor can be widely used in square, villas, residential, lanes and sidewalks, shopping malls, landscape, municipal road, swi妹妹ing pool, terrace and. General applicability is much lower than marble, brick, square brick pavement.Self leveling primer sealer, conductive copper and platinum or copper network, antistatic putty or mortar, no solvent and self leveling antistatic floor floor paint processing coated closed primer – Pu conductive copper and platinum grounding – conductive putty or mortar trowel coating or high pressure airless spraying without solvent and self leveling antistatic finishes total film thickness of 1-3 妹妹 or more thick, antistatic surface layer thickness in more than 0.7妹妹, painting solventless release, convenient and quick construction, surface is smooth and beautiful, anti electrostatic surface abrasion life in more than 20 years.Acceptance criteria: 1, the ambient temperature is 25 degrees centigrade, the construction should reach 2-3 days after work, the hardness reached about 80%, 2 complete curing; surface can not be sticky phenomenon; 3, bubble: coated flat type, type of self leveling mortar without bubbles, small bubbles allow 1 /10 square meters, 4; good leveling, no large area trowel mark, the interface is smooth; 5, free floating, uniform color, a large area of the interface allows the color is not very obvious; 6, no impurities, but allow the airborne dust fall in tiny defects; 7, the floor surface should be the smoothness, glossiness should meet the design requirements (high gloss over 90, more than 70 light, half light from 50 to 70), Ping Tu type is light, water is half light ~ no light; 8, orange peel, mortar anti slip effect should be obvious.普通型 关闭底漆,导电铜铂或铜网,抗静电腻子或中涂漆抗静电面漆 地上处理-涂关闭底漆-铺导电铜铂接地-刮导电腻子或涂导电中涂漆-打磨平整-涂抗静电面漆(喷涂,刷涂或辊涂) 总涂膜厚0.2-0.5妹妹,抗静电面层厚度约0.1-0.2妹妹(涂两道),造价低,涂装时有溶剂开释,外观平整度及面层耐磨运用寿命不如自流平型。 压花地坪是一种全新的经济的绿色环保混凝土表层处理资料。压花产品较凸起的特性是能够直接在混凝土表层非分逼真的体现多种差别地上资料的质地,纹路和荣耀。硬度和混凝土的硬度是相同的,首要取决于混凝土的标号和厚度。不单行进混凝土外观抗压,抗折,耐磨性等物理特性,还能够呈现出酷似自然花岗岩,大理石,剁斧石,火山岩,青石板,木纹板及砖石的作用。标美彩石压花系列色彩多达三十多种,差别的组合能够分配出任意的色彩,能使您的幻想任意奔驰,为计划师供给了无穷的构想空间,知足了差别时代,差别修建的需要。联络:4oo-o7o9-91o 在水性环氧自流平涂装中常用的助剂有松散剂,消泡剂,流平剂,流变剂,还有防静电,防滑,消光等功用性助剂。在地坪涂估中常常见的缺陷首要有缩孔,针孔,橘皮,丢失光,缩变和发笑,由于松散欠好而引起的发花和浮色,色彩不均,由于未流平而引起外观不平等问题。这些问题常常需要稳健的助剂来消弭 助剂是水性环氧树脂涂料出产,储存及施工过程中弗成短少的组分之一,但有大批企业以为其名助”而疏忽其。运用各类助剂对涂料和
涂膜机能的作用,有针对性地选用各类助剂。 水性环氧自流平涂料应选用的助剂有消泡剂,散漫剂,流变调节剂,流平剂等。具体遴选时应考虑与水性环氧系统的相容性,预防泛起凝胶和涂膜浮油等缺陷。 散漫剂的作用是将颜料,填料的二次颗粒外观湿润,并经机械剪切的方法从二次颗粒研磨散漫到低级颗粒外观进行吸附,包覆,经过负电荷的相互排挤作用使颜填料不乱地悬浮在涂猜中,坚持不乱状况。散漫剂的另外一作用是上色性,各类颜料,填料的粒径,密度均不相同。要求存在差别色素的颜料之间的内聚力较弱,才有均匀的展色性,而不会引起浮色的发花。一般应选高分子聚合物型,其适中的亲水亲油平衡值使之与该双组分系统存在较好的相容性,能有效地操控浮色并能很好地使颜填料不乱地散漫在系统中,然后行进产品的储存不乱性。压花地坪可广泛应用于广场,别墅,小区,车行道,人行道,商场,园林景观,市政道路,游泳池,天台等。总适费用远比大理石,面包砖,广场砖铺装低。 自流平型 关闭底漆,导电铜铂或铜网,抗静电腻子或沙浆
,无溶剂自流平抗静电地坪漆 地上处理-涂关闭底漆-铺导电铜铂接地-导电腻子或沙浆
-镘涂或高压无气喷涂无溶剂自流平抗静电面漆 总涂膜厚1-3妹妹或更厚,抗静电面层厚度在0.7妹妹以上,涂装时无溶剂开释,施工方便快捷,外观平整漂亮,防静电面层耐磨损寿命在20年以上。 检验标准:1,环境温度为25℃时,施工后2-3天应到达实干,即硬度到达完结固化的80%左右;   2,外观不能呈现发粘现象;   3,气泡:平涂型,沙浆
型无气泡,自流平答应1个小气泡/10平方米;   4,流平性好,无镘刀痕,大面积接口处基本平整;   5,无浮色发花,色彩均匀共同,大面积接口处答应有极不明显的色差;   6,无粗杂质,但答应有空气中的浮尘掉落在形成的极小缺陷;   7,地坪外观应平整滑润,光泽度应到达计划要求(高光泽≥90,有光≥70,半光50~70),平涂型为有光,水性为半光~无光;   8,桔皮,沙浆
防滑面作用应很明显。